synth_tools

Back

Https://diotec.com/tl_files/diotec/files/pdf/datasheets/b40c3700.pdf Diotec rectifier diode bridge Thermal enhanced ultra thin fine pitch quad flat package (http://www.st.com/resource/en/datasheet/stm8s003f3.pdf ST UQFN 6 pin 0.5mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/ACS711-Datasheet.ashx Allegro Microsystems 24-Lead Plastic Shrink Small Outline Package (MS) [MSOP], variant of 10-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket 12-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf 6x-dip-switch SPST , Slide, row spacing 9.53 mm (375 mils 24-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin SMD 9x-dip-switch SPST CTS_Series194-9MSTN, Piano, row spacing 5.9 mm (232 mils), body size 9.78x27.58mm (see e.g. Https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile 3x-dip-switch SPST , Piano, row spacing 10.16 mm (400 mils THT DIP DIL PDIP 2.54mm 22.86mm 900mil SMDSocket SmallPads 4-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads 16-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils), LongPads 24-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), https://toshiba.semicon-storage.com/info/docget.jsp?did=1421&prodName=TLP3021(S Toshiba 11-7A9 DIL DIP PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads 42-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf 8x-dip-switch SPST Omron_A6H-8101, Slide, row spacing 7.62 mm (300 mils), Socket 12-lead though-hole mounted DIP package, row spacing 11.48 mm (451 mils SMD DIP DIL PDIP 2.54mm 7.62mm 300mil reed relay Standex-Meder SIL-relais, Form 1C, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_SIL.pdf Standex-Meder SIL-relais, Form 1B, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_SIL.pdf Standex Meder SIL reed relais Standex-Meder SIL-relais, Form 1C, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_SIL.pdf Standex-Meder SIL-relais, UMS, see http://cdn-reichelt.de/documents/datenblatt/C300/UMS05_1A80_75L_DB.pdf Resistor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator JST SH series connector, 505405-0970 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator JST EH series connector, DF52-10S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator Soldered wire connection, for a single 0.1 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 1.7mm, outer diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-124, 45Degree (cable under 45degree), 5 pins, pitch 10mm, size 82.3x14mm^2, drill diamater 1.5mm, 2 pads, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00289, 4 pins, pitch 5mm, size 30x10.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 134, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00051, 8 pins, pitch 5mm, size 46.5x15mm^2, drill diamater 1.4mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-3-5-5.08 pitch 5.08mm size 30.5x11.2mm^2 drill 1.3mm pad.

New Pull Request

Labels Milestones