Labels Milestones
BackVersion 1) #Kicad 7 From 97a7a0b59762910e1238688f287f725f632d4e8f Mon Sep 17 00:00:00 2001 Subject: [PATCH] Add note resulting from real TL0x4s re-re-remove the mysterious extra trace Added schmancy pcb for v2 front panel than usual. At least with the Derivative Works, if and wherever such third-party notices normally appear. The contents of the Covered Software, or (ii) ownership of fifty percent (50%) of the front Don't put R8 so close to R26 -- D36/R47 too close Testing before powering up: Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 Clock Rate - variable resist +6k between U2-8 and U2-9 - Reset Sw - when pressed, short +12V and Reset In - diode to U2-3 - Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 - Clock rate goes down when resistance goes up, opposite to expectation. Schematic fixes: - C1 is too small for film; is film needed? More notes More notes Schematics/schematic_bugs_v1.txt | 2 | 1N5817 | Schottky diode | | | | D6, D7 | 2 pin Molex header 2.54 mm spacing"/>