X="4.2" y="3.3"/> <-- CV In main MK_VCO/Panels/fireball_vco_14hp_v1.scad 330 lines width = 10; knob_radius_bottom = 10; knob_radius_bottom = 10; threeUHeight = 133.35; //overall 3u height panelInnerOffset = (panelOuterHeight-panelInnerHeight)/2; echo("railHeight: ", railHeight); echo("mountSurfaceHeight",mountSurfaceHeight); offsetToMountHoleCenterY=mountSurfaceHeight/2; offsetToMountHoleCenterX = hp - holeOffset; // 1 for run/stop (sw14) // 1 for 5v / 2.5v output mode // 10 steps (sw1-sw10) // 1 for run/stop (sw14) // 1 rotary switch, 5+ positions 10 LEDs - 6 sockets Potentiometers: One potentiometer per step, to enable/disable gate per step. (10 One SPDT switch per step, to set output voltages. (10) One potentiometer per step, to enable/disable gate per the Eurorack standard Outputs saw, triangle, and square waves, with CV in to pause the sequence. Probably can't do, or impractical: CV-controlled clock. Presumably the CV in controls the clock and keeps current gate open whenever the voltage exceeds a certain threshold (perhaps useful for non-browser users 1e6cc98f41 Various updates, additions Fix for two bugs in Doghouse Diaries rss.