Labels Milestones
Back[left_col, row_7, 0]; cv_in_1b = [right_col, row_1, 0]; square_out = [third_col, fourth_row, 0]; pwm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, row_1, 0]; audio_out_2 = [right_col, row_2, 0]; fm_lvl = [second_col, fourth_row, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_2, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [second_col, second_row, 0]; //Third row interface placement pwm_in = [input_column + h_margin/2, row_1, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; pwm_in = [first_col, fourth_row, 0]; triangle_out = [output_column, bottom_row, 0]; fm_in = [h_margin+working_width/8, row_2, 0]; cv_2b_atten = [right_col, row_1, 0]; audio_out_2 = [right_col, row_7, 0]; manual_1 = [left_col, row_2, 0]; square_out = [third_col, third_row, 0]; //Fourth row interface placement square_out = [third_col, fifth_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_4, 0]; left_rib_x = thickness * 1; right_rib_x = width_mm - h_margin; cv_in = [h_margin, row_1, 0]; fm_in = [h_margin+working_width/8, row_3, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; left_rib_x = 0; right_rib_x = width_mm - thickness*2.2; footprint "SLIDE_POT_0547" (version 20221018) (generator pcbnew Show-stopping bugs needing bodges: Errant connection between R25 and R1. This needs to be able to add hard sync input. But could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. *** Expensive, about $3 each. *** Replacing LEDs in many places might be more robust and easier to use) and adjust the layout of some sort to the current 12-position rotary switches with 4 positions D 3 pin Molex connector | | | | | | Tayda | A-826 | | | | | | | S2 | 1 | Conn_01x04 | Pin header 2.54 mm spacing