Labels Milestones
BackTBD. Note: Mid-surdos start with MS3. After the first number in this period. Schematics/Dual_VCA_with_cv2.diy Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/MountingHole_3.2mm_M3.kicad_mod Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/Jack_6.35mm_PJ_629HAN.kicad_mod Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/Potentiometer_Bourns_3296W_Vertical_screw_centered.kicad_mod Normal file Unescape main ENV/README.md 3 lines Schematics/Luthers_Perfboard.pdf Normal file View File 398c2b234c Checkpoint after tweaking footprints some more, starting over at 14hp Added hard sync to schematic, laid out PCB with 2 pins, pitch 5mm, size 47.3x14mm^2, drill diamater 1.4mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10690 pitch 3.5mm size 18.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00076 pitch 7.5mm Varistor, diameter 7mm, width 4.5mm, pitch 10mm Varistor, diameter 9mm, width 4mm, pitch 5mm size 71.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-407, 45Degree (cable under 45degree), 3 pins, pitch 3.5mm, size 11.5x8.3mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-2, 2 pins, pitch 5.08mm, size 81.3x11.2mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00067.
New Pull Request