3
1
Back

C1, C11, C12 | 1 uF | Polarized capacitor | | | | R15, R17, R19 | 2 | 1N5817 | Schottky diode | | | | R16, R18, R26 | 3 Hardware/PCB/precadsr/precadsr.sch | 125 .../PCB/precadsr_Gerbers/precadsr-B_Mask.gbr | 481 .../PCB/precadsr_Gerbers/precadsr-F_Paste.gbr | 15 .../PCB/precadsr_Gerbers/precadsr-F_SilkS.gbr | 128 .../PCB/precadsr_Gerbers/precadsr-NPTH.drl | 17 .../fastestenv_Switch_Hole.kicad_mod | 17 .../Bigger_Push_Switch_Hole_NPTH.kicad_mod | 17 ...tenv_Panel_Slotted_Mounting_Hole.kicad_mod | 23 .../SolderWirePad_1x01_Drill0.8mm.kicad_mod | 19 .../ao_tht.pretty/TO-92_Inline_Wide.kicad_mod | 36 .../ao_tht.pretty/Power_Header.kicad_mod | 75 .../Push_button_A-5050.kicad_mod | 13 Binary files /dev/null and b/3D Printing/Panels/MAGIC MISSILE VCF.png | Bin 0 -> 580484 bytes .../Panels/Radio_shaek_standoff_padded.stl | Bin 12821 -> 0 bytes Images/precadsr-panel.png | Bin 0 -> 36336 bytes create mode 100644 Hardware/Panel/precadsr-panel/precadsr-panel.kicad_sch "Pots, switches, misc" 50 Optional SIP socket only if you are using Eurorack height = 128.5; // A little less then 3U // Thickness of module (HP) width = 36; // [1:1:84] width = 40; // widest element is rotary, at 30mm right_panel_width = width_mm - thickness*2.2; footprint "SLIDE_POT_0547" (version 20221018) (generator pcbnew footprint "SOCKET_2_PIN_Header" (version 20211014) (generator pcbnew footprint "SLIDE_POT_0547" (version 20211014) (generator pcbnew footprint "SOCKET_2_PIN_Header" (version 20211014) (generator pcbnew footprint "POT_2_PIN_Header" (version 20211014) (generator pcbnew footprint "SOCKET_2_PIN_Header" (version 20211014) (generator pcbnew footprint "PinSocket_1x02_P2.54mm_Vertical" (version 20211014) (generator pcbnew All the remaining project files are covered by the Free Software Foundation, either version but WITHOUT ANY WARRANTY; without even the implied warranty of any subsequent version published by the Open Source Hardware Symbol Open Source Initiative, either version but WITHOUT ANY WARRANTY; without even the implied warranties or.

New Pull Request