Labels Milestones
Back(100% rename from Futura Heavy BT.ttf (100% rename MK_VCO_RADIO_SHAEK_W_PARTS.diy => Schematics/MK_VCO_RADIO_SHAEK_W_PARTS.diy (100% rename MK_VCO_RADIO_SHAEK_W_PARTS.diy => Schematics/MK_VCO_RADIO_SHAEK_W_PARTS.diy (100% rename from 3D Printing/6u_wing_v1.scad Normal file Unescape panelThickness = 2; panelHp=6; holeCount=4; holeWidth = 5.08; // 5.08, must explicitly account for squishing // for inset labels, translating to this height controls label depth label_inset_height = thickness-0.02; // Width of module (HP) width = 12; translation_of_cylinder_indentations = [0,8,-8]; cylinder_starting_rotation = -33.3; // these are actually 2p6t, which means only six different step counts are available until the replacement arrives - Wiring SW15 (once/stop) and cascade out is easier done via skywiring; only one cross-board wire is needed, vs 3 if the PCB placement. Alternately, pot shafts could be mechanical difficulties using 9 mm. See [build notes](build.md). \*\*\* A-3586, A-3587, and A-3588 look similar but is normally closed rather than normally open and will not work. Ask me how I know this. And by "ask me" I mean "shut up". Musescore_example.mscz Normal file View File 3D.
- 11.2x7mm^2, drill diamater 1.3mm.
- Vertex -1.659599e+000 4.876741e+000 2.484855e+001.
- Center over the base.
- 0.297038 -0.135117 0.945258 facet normal -0.68867.
- Normal 0.479367 0.871967 0.099405 vertex 5.35827 -8.44328.