synth_tools

Back

One is easy hole_bottom = hole_top - 90; hole_bottom = hole_top - 90; DivotRadius = KnobMinorRadius*.4; // Primary knob cylinder for (i=[0 : RingMarkings-1] rotate([0, 0, 180] // Left side: meta-step controls // run/stop (switch // cv out // cv range (switch between 2.5v and 5v max // gate out (j4/j10) // clock in (j2/j11) // casc out (j14/j15 // reset/casc in (j1/j13 // gate out (j4/j10 // clock in (j2/j11) // casc out (j14/j15 // reset/casc in (j1/j13) // gate out (j4/j10 // clock out (j5/j12) // glide in (sleeve and normal both GND) 6x Sockets, 2pin: Gate out (could normal to TP10, optional) - Casc out 2x Toggle Switches, 2pin: all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - step - reset in - RESET / CASCADE in RESET / CASCADE in RESET / CASCADE in - glide in (sleeve and normal both GND Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins LED diameter 3.0mm z-position of LED center 3.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, diameter 3.0mm, 2 pins, pitch 5mm, size 82.3x14mm^2, drill diamater 1.1mm, pad diameter 2.3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 3.5mm, size 28.7x7mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 1-282834-1, 11 pins, pitch 2.54mm, size 18.240000000000002x6.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-7-5.08, 7 pins, pitch 5mm, size 81.5x15mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1814728/pdf PhoenixContact PTSM0.5 7 2.5mm vertical SMD spring clamp terminal block RND 205-00246, 7 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex PicoBlade Connector System, 43045-1621 (alternative finishes: 43045-162x), 8 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated.

New Pull Request

Labels Milestones