synth_tools

Back

Pitch 0.635; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot519-1_po.pdf SSOP16: plastic shrink small outline package; 28 leads; body width 4.4 mm; (see NXP sot054_po.pdf TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf TO-92 leads in-line, wide, drill 0.75mm, handsoldering variant with enlarged pads (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot487-1_po.pdf HTSSOP, 38 Pin (http://www.ti.com/lit/ds/symlink/tlc5951.pdf#page=47&zoom=140,-67,15), generated with kicad-footprint-generator Hirose DF11 through hole, DF11-12DP-2DSA, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py VQFP, 100 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_100_4.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0210, with PCB locator, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 16 Pin (http://cds.linear.com/docs/en/datasheet/37551fd.pdf#page=23), generated with kicad-footprint-generator Mounting Hardware, inside through hole M3, height 5, Wuerth electronics 9774070360 (https://katalog.we-online.de/em/datasheet/9774070360.pdf), generated with kicad-footprint-generator JST XA series connector, 505405-0270 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator Hirose FH12, FFC/FPC connector, FH12-33S-0.5SH, 33 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.15 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3.5mm, size 15x8.3mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00021 pitch 5mm size 16.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MKDS-1,5-10, 10 pins, pitch 3.5mm, size 18.5x8.3mm^2, drill diamater 1.4mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00005 pitch 5mm Varistor, diameter 9mm, width 3.6mm, pitch 5mm size 72.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-10-5.08 pitch 5.08mm size 20.3x9.8mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00287, 2 pins, pitch 5.08mm, size 35.6x8.45mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 131, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00058, 45Degree (cable under 45degree), 14 pins, pitch 10mm, size 95x8.1mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00027 pitch 10mm size 25.8x8.2mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00048, 5 pins, pitch 10mm, size 45x10.3mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-136, 45Degree (cable under 45degree), 14 pins, pitch 5mm, size 50x7.6mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-503 45Degree pitch 7.5mm size 21.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-124, 45Degree (cable under 45degree), 3 pins, pitch.

New Pull Request

Labels Milestones