Labels Milestones
Back43 - 60mm slider - 7mm, +4mm extra pushbutton panel mounts - 8.6mm, +4mm extra - pushbutton // glide in (sleeve and normal both GND 6x Sockets, 2pin: - all step switches (all go to same bus run/stop 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below - Clock rate (B100k) (not sure yet which 2 pins LED, diameter 20.0mm, 2 pins, pitch 2.54mm, size 8.08x6.2mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-4-5.08 pitch 5.08mm size 55.9x10.6mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-605 45Degree pitch 7.5mm size 75x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10702, vertical (cable from top), 3 pins, pitch 7.5mm, size 22.5x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-10 pitch 5mm size 27.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-616, 45Degree (cable under 45degree), 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED15MMGE_LED15MMGN%23KIN.pdf LED_SideEmitter_Rectangular Rectangular SideEmitter Rectangular size.
- Filmoscope setup Add ground fills, fix.
- Add PDF' (#2) from schematic into main.
- 5.957538e-001 facet normal -0.265169 0.618852 0.739397 facet.
- Pins Switch, single pole double throw K switch.