3
1
Back

Package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-3-1/ TO-263/D2PAK/DDPAK SMD package, orientation marker at anode, https://media.digikey.com/pdf/Data%20Sheets/CREE%20Power/CLM3A-BKW,GKW.pdf LED, SMD, PLCC-2, 3.0 x 3.0 VSSOP, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3471fb.pdf#page=15), generated with kicad-footprint-generator JST XA vertical JST J2100 series connector, B36B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator Harwin Female Vertical Surface Mount Tactile Switch for High-Density Mounting, 4.3mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89019xx, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose DF13 through hole, DF13-09P-1.25DSA, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-BE-LC, 40 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py VSON 10 Thermal on 11 3x3mm Pitch 0.5mm https://www.nxp.com/docs/en/application-note/AN10343.pdff Fairchild-specific MicroPak-6 1.0x1.45mm Pitch 0.5mm http://www.ti.com/lit/ds/symlink/tpd4e02b04.pdf USON-10 2.5x1.0mm Pitch 0.5mm http://chip.tomsk.ru/chip/chipdoc.nsf/Package/D8A64DD165C2AAD9472579400024FC41!OpenDocument VSON 10 Thermal on 11 3x3mm Pitch 0.5mm vertical Molex KK-254 Interconnect System, old/engineering part number: 22-27-2111, 11 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.15 mm² wires, reinforced insulation, conductor diameter 0.5mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-504 45Degree pitch 5mm size 15x10.5mm^2 drill 1.4mm pad 2.6mm Terminal Block WAGO 236-506, 45Degree (cable under 45degree), 8 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop as test point, pitch 3.81mm, size 15.1x7.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type205_RT04502UBLC 45Degree pitch 10mm size 105x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00052 pitch 5mm size 15x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00251, 12 pins, pitch 5.08mm, size 25.4x10.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-507, 45Degree (cable under 45degree), 4 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.4mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block connector http://www.phoenixcontact.com/us/products/1814715/pdf PhoenixContact PTSM0.5 4 2.5mm vertical SMD spring clamp terminal block RND 205-00059 45Degree pitch 5mm size 25x7.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00300 pitch 10mm size 92.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-8-5.08 pitch 5.08mm size 71.1x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO.

New Pull Request