Labels Milestones
BackSMT J bend https://dznh3ojzb2azq.cloudfront.net/products/Slide/JS/documents/datasheet.pdf MEC 5G single pole normally-open tactile switch SPST angled PTS645VL83-2 LFS C&K Button SW PUSH SMALL Tactile C&K Generic Buzzer, D12mm height 9.5mm shunt pin pitch 5.00mm diameter 8.0mm C, Axial series, Axial, Horizontal, pin pitch=7.5mm, , length*diameter=5.1*3.1mm^2, http://www.vishay.com/docs/45231/arseries.pdf C Axial series Axial Horizontal pin pitch 5.00mm length 7mm width 2.5mm Capacitor C, Rect series, Radial, pin pitch=2.50mm, , length*width=4*2.5mm^2, Capacitor C Rect series Radial pin pitch 10.16mm length 7.62mm diameter 9.53mm Diode, 5KP series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf Diode DO-34_SOD68 series Axial Horizontal pin pitch 5.08mm size 35.6x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR vertical pitch 5mm size 30x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-116, 45Degree (cable under 45degree), 10 pins, pitch 7.5mm, size 30x11mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-204 45Degree pitch 5mm size 30x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00233, 3 pins, pitch 2.54mm, size 5.54x6.5mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector Terminal Block WAGO 804-102 45Degree pitch 7.5mm size 92.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MPT-0,5-6-2.54, 6 pins, pitch 3.5mm, size 7x6.5mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-106, 45Degree (cable under 45degree), 10 pins, pitch 5.08mm, size 25.4x8.45mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO.
New Pull Request