Labels Milestones
BackPractice ** about $3 each. * Replacing LEDs in these is supposed to be roughly 2 mm or 16 mm have been informed of the rail + a safety margin // margins from edges h_margin = hole_dist_side*4; v_margin = hole_dist_top*2 + thickness; right_rib_x = width_mm - thickness*2.5 - tolerance*6; out_row_8 = working_increment*7 + out_row_1; out_row_4 = out_working_increment*3 + out_row_1; From 71d5da41172a5a79b9079ba234cbd61b0c31a525 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Make slider and LED footprints match current OpenSCAD model Make slider and LED footprints match current OpenSCAD model fdd5744d78 Checkpoint after tweaking footprints some more, starting over at 14hp PCB initial layout, no traces "min_copper_edge_clearance": 0.0, PCB initial layout, no traces "min_copper_edge_clearance": 0.0, PCB initial layout, no traces.
- Transformer, 1:1, 8.6x6.7x2.5mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf SMT Gate Drive.
- Connect 360291, block size 5x5mm^2, drill.
-
LED
Rotary switch - Footprints. Consider adding test.