synth_tools

Back

Switch, https://www.cui.com/product/resource/sj1-353xng.pdf TRS 3.5mm, horizontal, through-hole, with switch, horizontal shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf Bourns rotary encoder, PEC09, with switch, vertical shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf Sensortech MiCS MEMS sensor Infineon, IP57, XENSIV, LGA-5, https://www.infineon.com/dgdl/Infineon-IM73A135-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c7f2a768a017fadec36b84500 MEMS Microphone LGA Dust Water TDK InvenSense MEMS I2S Microphone: https://www.knowles.com/subdepartment/dpt-microphones/subdpt-sisonic-surface-mount-mems microphone MEMS I2S Microphone: https://invensense.tdk.com/products/ics-43434/ microphone MEMS I2S SPH0645LM4H Knowles Sensirion, SHT40, SHT41, SHT45, DFN, 4 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=10047&prodName=TLP3123), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-BE-A, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator connector wire 2.5sqmm strain-relief Soldered wire connection with feed through strain relief, for a single 0.15 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 282834-8, 8 pins, pitch 5mm, size 40x7.6mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-309 45Degree pitch 10mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-212, 45Degree (cable under 45degree), 9 pins, pitch 3.5mm, size 18.5x8.3mm^2, drill diamater 1.5mm, 2 pads, pitch 5.08mm, size 50.8x11.2mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PT-1,5-5-5.0-H, 5 pins, pitch 3.5mm, size 18.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector Terminal Block WAGO 804-104 45Degree pitch 10mm size 32.3x14mm^2.

New Pull Request

Labels Milestones