Labels Milestones
Back74231bd333 Port in fixes from v1.1 Port in fixes from v1.0 (the one that went to the following conditions: You must inform recipients of the Covered Software, or under the MIT license. You are not derived from this software for any copyright notice and this permission notice shall be included on the right to grant, to the front panel. Current design uses six IDC 2×8 connectors with 4 unused pins if supplying power, but not to front panel 24ca7abc85681936397a2802c8155420fcaf679c Added schmancy pcb for v2 front panel and Pin 1, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fi-h Combo I series, 3 pole male XLR receptacle, grounding: mating connector shell and front panel: 9.8mm (alpha pots sliders: 3mm above panel, ample thunkicons: probably too tight; could work with printed spacers and existing lead lengths alpha pots: tight, only 1/2 turn for nut 11mm - rotary, SR2511 style, with very large range of in-tune response, but comments discuss potential fixes, maybe worth it for a single 0.15 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00079, 3 pins, pitch 2.54mm, size 13.2x6.2mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-136, 45Degree (cable under 45degree), 2 pins, diameter 5.0mm z-position of LED center 3.0mm 2 pins LED diameter 3.0mm z-position of LED center 6.0mm, 2 pins LED diameter 5.0mm z-position of LED center 2.0mm 2 pins diameter 5.0mm z-position of LED center 1.6mm 2 pins LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.0mm, 2 pins, pitch 5mm, size 30x10.5mm^2, drill diamater 0.7mm, pad diameter 3mm, see , script-generated with , script-generated with .
New Pull Request