Labels Milestones
BackFitting inside a case easier. Or 10mm if it can fit; losing the bodge area. Assembly Tests: Glide In - U1-13 (can get at from top when assembled - Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Glide attenuator (B10k) (join two left pins from below) - Clock rate (B100k) (not sure yet which 2 pins diameter 8.0mm 3 pins UFQFPN 20-lead, 3 x switching (normalling) stereo jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mah A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5fbv-sw B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj4hh Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose, gold plated contacts, fully threaded nose, https://www.neutrik.com/en/product/nrj6hh Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with a precision give to the fab MK_SEQ/Schematics/Unseen Servant/Unseen Servant.kicad_pro | 40 .../Unseen Servant/Unseen Servant.kicad_pcb | 2 Hardware/Panel/precadsr-panel/sym-lib-table | 2 | 4.7k | Resistor | | | Tayda | A-1135 | | | | | | | Tayda | A-553 | | | | 1 | LM358 | Low-Power, Dual Operational Amplifiers, DIP-8/SOIC-8/TSSOP-8/VSSOP-8