Labels Milestones
BackC11 | 2 create mode 160000 Hardware/lib/Kosmo_panel main synth_tools/3D Printing/Pot_Knobs/Pot Knob in Two Parts_sep.stl Executable file View File Find and replace last few thin traces, fix teardrops and gnd fill Embiggen traces, add teardrops updated C5 footprint & tracing; schematic annotation Add 55k-ish resistor to coarse knob to fix tuning range Add 55k-ish resistor to coarse knob to fix this and turn it into a corner for narrower modules if we want them to match. We could also use a ground plane Updates from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc4fav-0 A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, steel retention lug, lateral right PCB mount, retention spring, https://www.neutrik.com/en/product/ncj5fi-v Combo A series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/nc3faah1 AA Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fah1 A Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, asymmetric.
New Pull Request