synth_tools

Back

For 1.6mm PCB's with 08 contacts (polarized Highspeed card edge connector for PCB's with 60 contacts (polarized Highspeed card edge connector for 1.6mm PCB's with 50 contacts (not polarized Highspeed card edge connector for PCB's with 08 contacts (not polarized Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf 0.8 mm BGA-64, 10x10 raster, 8x8mm package, pitch 0.65mm WLP-4, 2x2 raster, 0.73x0.73mm package, pitch 0.4mm; see section 7.8 of http://www.st.com/resource/en/datasheet/DM00387108.pdf Texas Instruments, NDQ, 5 pin (https://www.ti.com/lit/ml/mmsf022/mmsf022.pdf TO-PMOD-11 11-pin switching regulator package, http://www.ti.com/lit/ml/mmsf025/mmsf025.pdf Vishay PowerPAK SC70 single transistor package http://www.vishay.com/docs/70486/70486.pdf TO-46-4 with Valox case, based on the rails v_wall(h=4, l=height-rail_clearance*2-thickness, th=2); h_wall(h=4, l=slider_spacing*10+left_panel_width/2-right_rib_thickness, th=1.5); main drumkit/Schematics/OttosIrresistableDance/OttosIrresistableDance.kicad_sch 1023 lines main synth_tools/Schematics/SynthMages.pretty/POT_2_PIN_Header.kicad_mod 44 lines main MK_VCO/Schematics/resistor_keyboard.diy 497 lines ebf8c2dd87 Move LED resistors next to transistors to save on panel wires More traces and vias, and net links Schematics/Unseen Servant/fp-info-cache glide in (sleeve and normal both GND Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins black IR-LED, diameter 3.0mm, hole diameter 1.6mm Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf Diode DO-201AE series Axial Horizontal pin pitch 2.50mm diameter 6.3mm height 5mm Non-Polar Electrolytic Capacitor CP, Axial series, Axial, Vertical.

New Pull Request

Labels Milestones