Labels Milestones
BackThe wall is coming out of the knob. TaperPercentage = 20; shaft_is_flatted = true; arrow_indicator_scale = 1.3; arrow_indicator_translate = [0,1,16]; arrow_scale_head = 2; left_col = 10 + center_adjust; right_col = width_mm - h_margin; cv_in = [h_margin, row_1, 0]; audio_out_2 = [right_col, row_5, 0]; cv_in_2a = [left_col, row_5, 0]; cv_in_2a = [left_col, row_7, 0]; manual_1 = [left_col, row_1, 0]; fm_pot = [input_column + h_margin/2, row_1, 0]; triangle_out = [third_col, fifth_row, 0]; square_out = [third_col, fifth_row, 0]; //left_rib_x = thickness + 6 + tolerance; extra_depth = 75 + tolerance; // rib + half a jack col_right = width_mm - h_margin; //special-case the knob before its final position. [mm] shafthole_height = 12; hole_vdist = 44.5; hole_hdist = 65; hole_diameter = 2; holeWidth = 10.16; // If you want wider holes for square, hexagonal etc. Shafts. ≥30 means "round, using current quality setting". // Height of module (HP) width = 36; // [1:1:84] width = 12; translation_of_cylinder_indentations = [0,8,-8]; cylinder_starting_rotation = -33.3; // these two come directly from kicad hole_right = hole_left + 78.5; // Step count (sw11 // for inset labels, translating to this height controls label depth label_inset_height = thickness-1; // Width of module (HP) width = 17; // [1:1:84] /* [Holes] */ hole_dist_top = 2.5; rail_clearance = 9; // mm.
New Pull Request