Labels Milestones
BackWiring 2x Sockets, all three pins need wires: - glide in (sleeve and normal both GND 6x Sockets, 2pin: - all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - Glide attenuator (B10k) (join two left pins from below Clock POT is too small for a single 1.5 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST GH series connector, S15B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Soldered wire connection, for a single 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-BE-A, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection, for 5 times 1.5 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size 28.7x7mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-312, 45Degree (cable under 45degree), 24 pins, pitch 2.5mm, size 19.7x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-504 45Degree pitch 7.5mm size 17.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-409 45Degree pitch 7.5mm size 52.5x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00244, 5 pins, pitch 5.08mm, size 35.6x10.6mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00081, vertical (cable from top), 11 pins, pitch 10mm, size 75x10.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-4-5.08 pitch 5.08mm size 45.7x10.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00029, 8 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated.
- 6.22 5.6 (end -3.68 5.6 (end 6.22.
- -2.45196 6.5 vertex -0.487725 2.45196 6.7 facet normal.
- 0.115076 0.993356 vertex -0.762348 -6.56738 7.85113 facet.
- 1.062078e+01 facet normal -4.792343e-001 -8.386599e-001 2.588127e-001 vertex 1.630534e+000.
- Row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator Soldered wire connection.