synth_tools

Back

For ($n = 1; // [0:Flat, 1:Recessed, 2:Dome] // Do you want to socket the timing capacitors. \*\* Use only four (4) potentiometers, either 9 mm vertical board mount OR: **Potentiometer, 16 mm vertical board mount OR: | | J6, J10, J11 | 3 | 10uF | Polarized capacitor | | | | | | | Tayda | A-4349 | | | | | C12 | 1 | SW_SPDT | Switch, single pole normally-open tactile switch Omron B3F right angle 3mm spherical light pipe 4 way SMT resistor net Bourns CAT16 series, 8 way SMT resistor net, Bourns CAT16 series, 8 way Resistor, MELF, MMB-0207, http://www.vishay.com/docs/28713/melfprof.pdf Resistor, MiniMELF, MMA-0204, http://www.vishay.com/docs/28713/melfprof.pdf 4 contact shunt resistor shunt resistor shunt resistor shunt resistor 4 contacts 4 contacts shunt resistor,https://www.ohmite.com/assets/docs/res_lvk.pdf Shunt Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WSON, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8127-AVR-8-bit-Microcontroller-ATtiny4-ATtiny5-ATtiny9-ATtiny10_Datasheet.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3.5mm, size 18.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360271 size 9x7.3mm^2 drill 1.5mm pad 3mm Terminal Block Phoenix MKDS-3-12-5.08, 12 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10699.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00080 pitch 10mm size 42.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-109 45Degree pitch 10mm size 75x8.1mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00053, 10 pins, pitch 5mm, size 55x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type059_RT06306HBWC pitch 3.5mm size 15x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-108 45Degree pitch 5mm size 50x8.1mm^2 drill 1.1mm pad 2.1mm terminal block Metz Connect Type175_RT02706HBLC, 6 pins, pitch 7.5mm, size 62.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 804-113, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO.

New Pull Request

Labels Milestones