synth_tools

Back

Strip, LSHM-105-xx.x-x-DV-N, 5 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.1 mm² wire, basic insulation, conductor diameter 1.4mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-108 45Degree pitch 10mm size 52.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-103, 45Degree (cable under 45degree), 6 pins, pitch 3.5mm, size 42x7.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector Terminal Block Phoenix PTSM-0,5-4-2.5-H-THR pitch 2.5mm size 7.2x10mm^2 drill 1.2mm pad 2.4mm Terminal Block 4Ucon ItemNo. 10689, 12 pins, pitch 5mm, size 21.5x15mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-307, 45Degree (cable under 45degree), 4 pins, pitch 10.2mm, size 107x8.3mm^2, drill diamater 1.15mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Mounting Hardware, inside blind hole M1.6, height 1.5, Wuerth electronics 9774110360 (https://katalog.we-online.de/em/datasheet/9774110360.pdf), generated with kicad-footprint-generator Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-110-xx.x-x-DV-N, 10 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP I, 32 pins, 18.4x8mm body (https://www.micron.com/~/media/documents/products/technical-note/nor-flash/tn1225_land_pad_design.pdf TSOP-I, 56 Pin (http://intantech.com/files/Intan_RHD2000_series_datasheet.pdf#page=38), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-BE-A, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOP, 4 Pin (https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/0_Datasheets/Humidity/Sensirion_Humidity_Sensors_SHTC3_Datasheet.pdf Sensirion DFN-8 SHT3x-DIS (https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf 24-Lead Plastic Shrink Small Outline (SN) - Narrow, 3.90 mm Body [DFN] (http://www.onsemi.com/pub/Collateral/NCP4308-D.PDF DD Package; 8-Lead Plastic Small Outline Narrow Body (http://www.analog.com/media/en/technical-documentation/data-sheets/ADuM7640_7641_7642_7643.pdf 24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (3mm x 2mm) (see Linear Technology 05081707_A_DHD16.pdf DH Package; 16-Lead Plastic TSSOP (4.4mm); Exposed Pad (see Microchip Packaging Specification 00000049BS.pdf 80-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body [TSSOP] with exposed pad - Ref http://pdfserv.maximintegrated.com/land_patterns/90-0349.PDF DFN, 10 Pin (http://rohmfs.rohm.com/en/products/databook/datasheet/ic/power/switching_regulator/bd8314nuv-e.pdf (Page 20)), generated with kicad-footprint-generator Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://datasheet.octopart.com/HVC0603T5004FET-Ohmite-datasheet-26699797.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 2mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex CLIK-Mate series connector, S5B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator JST XH series connector, B14B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator Stocko RFK MKS 16xx series connector, S07B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator JST EH top entry Molex Mini-Fit Sr.

New Pull Request

Labels Milestones