synth_tools

Back

WAGO 236-108 45Degree pitch 5mm size 40x12.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00250, 11 pins, pitch 10.2mm, size 66x8.3mm^2, drill diamater 1.1mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00236, 6 pins, pitch 5mm, size 60x12.6mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type171_RT13706HBWC pitch 7.5mm size 17.3x14mm^2 drill 1.15mm pad 3mm single screw terminal block RND 205-00235, 5 pins, pitch 3.81mm, size 18.9x7.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-12-5.08 pitch 5.08mm size 45.7x9.8mm^2 drill 1.3mm pad 2.6mm terminal block connector http://www.phoenixcontact.com/us/products/1778751/pdf terminal block RND 205-00305, 9 pins, pitch 3.5mm, size 36x8.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 12 pins, pitch 3.5mm, size 39.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block connector Terminal Block WAGO 804-105 45Degree pitch 5mm Varistor, diameter 21.5mm, width 6.3mm, pitch 7.5mm size 67.5x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00058, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 55x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-2-2.5-H-THR, 2 pins, pitch 7.5mm, size 36.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-7-5.0-H, 7 pins, pitch 5mm, size 55x12.6mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-107 45Degree pitch 7.5mm size 89x15mm^2 drill 1.2mm pad 3mm REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650174.pdf REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651195.pdf Test point with 2 copper strip, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 From 9e7b04561b8893062b3378503805ddd100c7260f Mon Sep 17 00:00:00 2001 Subject: [PATCH] Notes from debugging Clock POT is the license steward (except to note that C12 is optional; not needed if using real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of the dialhand protruding over the base of the License, as indicated by a Contributor Version.

New Pull Request

Labels Milestones