synth_tools

Back

Type073_RT02603HBLU pitch 5.08mm length 14mm diameter 4.5mm Fastron MECC Inductor, Axial series, Axial, Horizontal, pin pitch=100mm, , length*diameter=93*32.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf CP Axial series Axial Horizontal pin pitch 5.00mm length 7.2mm width 3.5mm solder Pin_ with flat with hole, hole diameter 0.7mm THT pad rectangle square THT rectangular pad as test Point, square 4.0mm side length, hole diameter 1.4mm wire loop with bead as test point, loop diameter2.548mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop bead wire loop with bead as test Point, diameter 1.5mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py TQFN, 16 Pin (https://www.onsemi.com/pub/Collateral/FUSB307B-D.PDF#page=56), generated with kicad-footprint-generator Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 1-770969-x, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0808, 80 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator Molex PicoBlade Connector System, 53048-0410, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-LC, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Inductor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.5 mm² wire, reinforced insulation, conductor diameter 0.48mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 32 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT4222H.pdf#page=40), generated with kicad-footprint-generator ipc_gullwing_generator.py LQFP, 48 Pin.

New Pull Request

Labels Milestones