synth_tools

Back

Pins IR-LED, diameter 3.0mm, 2 pins, pitch 2.5mm, size 13x5mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-5-5.0-H pitch 5mm size 25x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00241, 2 pins, pitch 5mm, size 40x9mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type703_RT10N03HGLU, 3 pins, pitch 10mm, size 25x9mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-111, 45Degree (cable under 45degree), 12 pins, pitch 7.5mm, size 82.5x10.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-302, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 81.5x15mm^2, drill diamater 1.1mm, pad diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-10-5.08 pitch 5.08mm size 45.7x10.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00080, vertical (cable from top), 7 pins, pitch 10mm, size 95x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00302, 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf module CMS SOT223 4 pins for trigger, gate, and CV routing updates to rev 2 Notes on needed revisions from revision 1: Corrected: Fix silkscreen misalignment for lower three knobs 4efd2875e8 Replaced accidentally dropped Fine tuning hole. Am totally not using git correctly More experimentation with panel title fonts } STLs, 10hp version.

New Pull Request

Labels Milestones