synth_tools

Back

Https://www.neutrik.com/en/product/nc3mbv-1 B Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact connected to trigger, gate jack is normalized\nto +12 V, and sustain voltage is taken from \npot pin 1 x 1 mm, 734-173 , 13 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog⟨=en&documentid=D31688_en), generated with kicad-footprint-generator Harting har-flexicon series connector, LY20-20P-DT1, 10 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.75 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00076, 11 pins, pitch 3.5mm, size 42.7x7mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00080 pitch 10mm size 22.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-107, 45Degree (cable under 45degree), 16 pins, pitch 2.54mm, hole diameter 0.5mm test point plated hole Plated Hole as test point, loop diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-103, 45Degree (cable under 45degree), 12 pins, pitch 5.08mm, hole diameter 1.0mm wire loop as test Point, square 2.0mm side length SMD pad SMD pad rectangle square THT rectangular pad as test Point, diameter 2.0mm, 2 pins LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, pitch 7.5mm, size 17.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal.

New Pull Request

Labels Milestones