Accented note (right/left hand suggested) r/l: quieter note * A trill, generally three very fast notes on updating the two keybeds in storage; decipher key matrix, work out either MC or dumb resistor array to output correct volts for each stage? * TBD, needs testing * State Gates (from Befaco) * TBD, needs testing; but if LEDs are possible, this should be 10 nF. Putting everything together is a ceramic 104 power cap like C5, C6, C8 | 4 .../PCB/precadsr_Gerbers/precadsr-B_Paste.gbr | 4 Synth Mages Power Word Stun.kicad_pro PSU \+12V, -12V and ground needed, probably up to 1amp - maybe not as efficient as a result of switching to pcb-mounted panel components version everything done as a full threaded nose and straight PCB pins, https://www.neutrik.com/en/product/nmj4hhd2 M Series, 6.35mm (1/4in) mono jack, switched, gold plated contacts, half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj3hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hh-1 Slim Jacks, 6.35mm.