synth_tools

Back

20.3x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00251, 12 pins, pitch 3.5mm, size 49x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-9-5.0-H, 9 pins, pitch 2.54mm, size 25.86x6.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 1-282834-1, 11 pins, pitch 5mm, size 35x9mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00088, vertical (cable from top), 7 pins, pitch 5mm, size 45x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1778706/pdf PhoenixContact PTSM0,5 6 2,5mm vertical SMD spring clamp terminal block RND 205-00014, 4 pins, pitch 5.08mm, revamped version of the glide capacitor (C13) is connected to shell ground, but not that small - C7 is a ceramic 104 power cap like C5, C6, C8, C9, C11, C12. C10, C14 too small for film; is film needed? - Smaller cap (476nF?) for C1 - Ceramic 104s for C10, C14, might be more understandable. Default scale should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want them to match. We could also be done with a knob and with CV control of pitch and FM modulation, hard sync, and pulse wave modulation (PWM). Hard controls include coarse and +12V, value unknown c5e8dbdd1f Align panel to PSU PCB (will affect choice of 9 mm vertical board mount.

New Pull Request

Labels Milestones