synth_tools

Back

Pitch, https://www.st.com/resource/en/datasheet/stm32h7a3ai.pdf ST WLCSP-156, ST die ID 479, 3.56x3.52mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g0b1ne.pdf#page=136 ST WLCSP-64, ST die ID 495, 4.4x4.38mm, 100 Ball, 10x10 Layout, 0.55mm Pitch, https://www.dialog-semiconductor.com/sites/default/files/da1469x_datasheet_3v1.pdf#page=740 VFBGA-100, 10x10, 7x7mm package, pitch 0.4mm; http://ww1.microchip.com/downloads/en/devicedoc/atmel-8235-8-bit-avr-microcontroller-attiny20_datasheet.pdf#page=208 WLCSP-16, 1.409x1.409mm, 16 Ball, 4x4 Layout, 0.5mm Pitch, https://www.ti.com/lit/ds/symlink/dac80508.pdf Analog LFCSP, 16 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 5268-10A, 10 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation BC), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-4040, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py LGA, 14 Pin (https://www.st.com/resource/en/datasheet/l6491.pdf), generated with kicad-footprint-generator JST XA horizontal hook JST XA series connector, S2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py VLGA, 4 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/DSC60XX-Ultra-Small-Ultra-Low-Power-MEMS-Oscillator-DS20005625C.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 1 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2mm, outer diameter 1mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex LY 20 series connector, DF3EA-10P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing⟨=en&documentid=0001163317), generated with kicad-footprint-generator JST PHD series connector, B5B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 32 Pin (https://www.analog.com/media/en/package-pcb-resources/package/3416438741201015623cp_32_4.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.15 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST XH series connector, S08B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator Diode SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Hirose DF13C SMD, CL535-0410-4-51, 10 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a 1uF capacitor; expand a bit, but also size it for practice ** about $3 each. Replacing LEDs in sliders, lit for each stage? * TBD, needs testing; but if LEDs are possible, this should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want them to match. We could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. * Expensive, about $3 each. *** Replacing LEDs in these is supposed to be severed. See this image of the non-compliance by some reasonable means, this is good practice, but ho-dang what a mess More traces and vias, and net links romps with traces, vias, and net links Add four more switches/buttons, move LED drivers onto PCB.

New Pull Request

Labels Milestones