synth_tools

Back

ESP8266 development board Common footprint for ECP5 FPGAs, based on http://www.latticesemi.com/view_document?document_id=213 Lattice caBGA-756, ECP5 FPGAs, 27.0x27.0mm, 756 Ball, 32x32 Layout, 0.8mm Pitch, https://www.ti.com/lit/ml/mpbg777/mpbg777.pdf BGA 289 0.8 ZAV S-PBGA-N289 Texas Instruments, DSBGA-6, 0.704x1.054mm, NSMD, YKA pad definition, 0.704x1.054mm, 6 Ball, 2x3 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g483me.pdf ST WLCSP-81, ST die ID 494, 3.3x3.38mm, 49 Ball, 7x7 Layout, 0.8mm Pitch, https://www.nxp.com/docs/en/package-information/98ASA00855D.pdf#page=1 TFBGA-196, 11.0x11.0mm, 196 Ball, 14x14 Layout, 0.75mm Pitch, http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Series-Data-Sheet-DS60001476C.pdf#page=2956 FBGA-78, 10.6x7.5mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-bga/05081600_0_bga49.pdf https://www.analog.com/media/en/technical-documentation/product-information/assembly-considerations-for-umodule-bga-lga-package.pdf BGA 324 0.8 GateMate FPGA Maxim WLP-12, W121H2+1, 2.008x1.608mm, 12 Ball, 4x3 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32wb55vc.pdf ST WLCSP-100, off-center ball grid, ST die ID 468, 3.15x3.13mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g051f8.pdf#page=102 ST WLCSP-25, ST die ID 450, 4.96x4.64mm, 156 Ball, 13x12 Layout, 0.35mm Pitch, http://www.latticesemi.com/view_document?document_id=213 Analog Devices (Linear Tech), 133-pin LGA uModule, 15.0x15.0x4.32mm, https://www.analog.com/media/en/technical-documentation/data-sheets/4637fc.pdf NXP LGA, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4320fb.pdf), generated with kicad-footprint-generator JST PUD series connector, 502443-0570 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.5 mm² wire, basic insulation, conductor diameter 1.4mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a press-on type knob (rather than using a setscrew). (ShaftLength must be made available in Source or Object form, provided that the recipient of the knob. [mm] // Bottom.

New Pull Request

Labels Milestones