synth_tools

Back

Wide

Add note that C12 is optional; not needed if using real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3faav1-0 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, with full threaded nose and straight PCB pins, https://www.neutrik.com/en/product/nmj4hfd3 M Series, 6.35mm (1/4in) mono jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj4hh Slim Jacks, 6.35mm (1/4in) switching stereo jack and switching ground contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3mav B Series, 3 pole male XLR receptacle, grounding: ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-v AA Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nl4md-h-2 speakON Chassis Connectors, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah-0 AA Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, lateral left PCB mount, replaces NLJ2MD-H, https://www.neutrik.com/en/product/nlj2mdxx-h speakON Combo, 2 pole chassis connector, grey D-size flange, countersunk thru holes, horizontal PCB mount, replaces NL8MD-V, https://www.neutrik.com/en/product/nl8mdxx-v 4 contacts, 3.5mm audio plug, https://www.cuidevices.com/product/resource/pdf/sp-3541.pdf DC.

New Pull Request

Labels Milestones