Labels Milestones
BackShaft) * https://www.mouser.com/ProductDetail/Bourns/PTL30-15R0-103B1?qs=X8nz4ozed5glbMOCRmYKzw%3D%3D (B10K, red LED, 30mm travel, 15mm shaft * TBD, needs testing; but if LEDs are possible, this should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want them to match. We could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. Replacing LEDs in these is supposed to be possible without disassembly of the indenting cones. ≥30 means "round, using current quality setting". Sphere_indents_faces = 16; knob_smoothness = 20; // [0:0%, 10:10%, 20:20%, 30:30%, 40:40%, 50:50%] // Width of module (HP width = 12; hole_vdist = 44.5; hole_radius = hole_diameter / 2; standoff_radius = hole_radius * 2.5; standoff_height = 3; difference() { union() { difference(){ color([.1,.1,.1]) panel(width); // lower h-rib reinforcer ## Photos [to be added] ## Documentation: * [Schematic](Docs/precadsr.pdf) * PCB layout: [front](Docs/precadsr_layout_front.pdf), [back](Docs/precadsr_layout_back.pdf) * [BOM](Docs/precadsr_bom.md) * [Build notes](Docs/build.md) How to use your choice of 9 mm vertical board mount | | | | | R1, R10, R11 | 3 | 10uF | Electrolytic capacitor | | U2 | 1 | Synth_power_2x5 | 2x5 pin shrouded header.
- DF11-26DP-2DSA, 13 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated.
- -7.030049e-001 5.870062e-001 facet normal -4.018291e-001 -7.028308e-001 5.869943e-001 vertex.
- Https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-503 45Degree.
- Of caxia score Image of.