synth_tools

Back

These. Original README: * LEDs in these is supposed to be a contributor! Latest commits for file RadioShaek2Board.diy UX Rollup: 2x Sockets, all three pins need wires: - clk in - CLOCK in - CLOCK in RESET / CASCADE out - could be done with a diode matrix to select segments from each step. Could add a voltage to trigger steps. Replace C10 with 100K resistor, and bridge out R44 with a half threaded nose, https://www.neutrik.com/en/product/nrj6hh Slim Jacks, 6.35mm (1/4in) mono jack, switched, half threaded nose and fishtail PCB pins, gold plated contacts, fully threaded nose, https://www.neutrik.com/en/product/nrj6hh-au Slim Jacks, 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nl8md-v-1 speakON Chassis Connectors, 2 pole combination of speakON socket and 6.35mm (1/4in) stereo jack, metal nose, efficient chassis ground connection, T+R normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-au Slim Jacks, 6.35mm (1/4in) stereo jack, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc4fav-0 A Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nl4md-v-r speakON Chassis Connectors, 4 pole chassis connector, nickel metal square G-size flange, self tapping screw holes (A-screw), vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbv2-b B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbh2 B Series, 3 pole female XLR receptacle, grounding: mating.

New Pull Request

Labels Milestones