Y="1.1"/> Update luther's layout Drill report for precadsr-panel.kicad_pcb Created on Tue Mar 5 20:19:51 2024 Copper Layer Stackup: ============================================================= L1 : F.Cu front L2 : B.Cu back Drill file 'precadsr-panel.drl' contains plated through holes are merged with plated holes count 0 Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-CmtUser.gbr Normal file View File Images/loop.png Normal file View File Find and replace last few thin traces, fix teardrops and gnd fill Embiggen traces, add teardrops Embiggen traces, add teardrops updated C5 footprint & tracing; schematic annotation update with full threaded nose and straight PCB pins, https://www.neutrik.com/en/product/nmj4hcd2 M Series, 6.35mm (1/4in) stereo jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3maah AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbv-1 B Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount.