synth_tools

Back

CNY70 refective photo coupler/interrupter Vishay CNY70 refective photo coupler IR Receiver Vishay TSOP-xxxx MINICAST IR Receiver Vishay TSOP-xxxx, CAST package, see https://www.vishay.com/docs/82742/tsop331.pdf IR Receiver Vishay TSOP-xxxx, MINICAST package, see https://www.vishay.com/docs/82669/tsop32s40f.pdf IR Receiver Vishay TSOP-xxxx, CAST package, see https://www.vishay.com/docs/82493/tsop311.pdf package for Kodenshi SG-105 with PCB locator, 10 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator JST ZE series connector, 53261-0271 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py UQFN, 20 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=37&zoom=160,-90,3), generated with kicad-footprint-generator ipc_noLead_generator.py TQFN, 20 Pin (JEDEC MS-012AB, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_14.pdf), generated with kicad-footprint-generator JST PHD series connector, S9B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF13-05P-1.25DS, 5 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc0015.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.127 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Stocko RFK MKS 16xx series connector, S5B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator JST VH series connector, S06B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.2mm, height 3.6, Wuerth electronics 9774110960 (https://katalog.we-online.de/em/datasheet/9774110960.pdf,), generated with kicad-footprint-generator connector Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-A, 40 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator Hirose DF13C SMD, CL535-0410-4-51, 10 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py 16-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SO), see.

New Pull Request

Labels Milestones