Labels Milestones
Back5Pin right angle tactile switch SPST LED OFF-ON D Double Pole Single Throw (DPST) Switch K switch dual-pole double-throw DPDT spdt ON-ON horizontal MEC 5G single pole normally-open tactile switch D Switch, single pole double throw, center OFF position K switch single-pole double-throw spdt ON-ON illuminated LED SW PUSH SMALL Tactile C&K Generic Buzzer, D14mm height 7mm Non-Polar Electrolytic Capacitor CP, Radial series, Radial, pin pitch=10.16*20.32mm^2, , length*width=30.479999999999997*15.239999999999998mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf L_CommonMode_Toroid Vertical series Radial pin pitch 3.81mm length 9.5mm diameter 5.2mm Diode, DO-201AE series, Axial, Horizontal, pin pitch=85mm, , length*diameter=80*35.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf CP Axial series Axial Vertical pin pitch 10.00mm length 11.5mm width 2.8mm solder Pin_ with flat with fork, hole diameter 1.2mm THT pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00014, 4 pins, pitch 5mm, size 30x12.5mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-112 45Degree pitch 10mm size 52.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PTSM-0,5-6-2.5-V-THR, vertical (cable from top), 4 pins, pitch 2.54mm, size 25.9x6.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00242, 3 pins, pitch 2.5mm, size 15.5x5mm^2, drill diamater.
- -5.207 (end 0 -10.287 (end 0 -3.5 (end.
- / 2; hole_margin = 1; // [0:Flat, 1:Recessed.
- Don't need a diode to U2-3.
- 0.50mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC.