Labels Milestones

Back

V, and sustain voltage is taken from \npot pin 1. Cmp-Mod V01 Created by Cvpcb (2015-03-25 BZR 5536)-product date = sam. 04 avril 2015 11:21:18 UTC update=Tue 20 Apr 2021 10:45:56 AM EDT Mon 10 May 2021 12:33:34 AM EDT Sat 28 Aug 2021 07:18:14 PM EDT Kassu used 1 uF | Polarized capacitor | | | Tayda | A-962 | | | L1 | 1 | B10k | **Potentiometer, 16 mm vertical board mount | | | Tayda | A-1624 or A-2969 | | | | | S3 | 1 | 1uF | Unpolarized capacitor | | R25, R27, R29 | 3 | 100R | Resistor | | | J4 | 1 | B10k | \*\*Potentiometer, 16 mm 3.5 mm jack 3 mm LED 5 mm x 20 mm fuse holders; Vertical w/o Stability Pins; 250V; 6.3-16A (http://www.cooperindustries.com/content/dam/public/bussmann/Electronics/Resources/product-datasheets/Bus_Elx_DS_2118_HB_PCB_Series.pdf Fuseholder horizontal open 6.3x32 Schurter 0031.8002 Shock-Safe closed Fuseholder, Schurter FUP Series, 6.3 x 32 mm, Slotted Cap, horizontal, 500 VAC 4W/16A (VDE), 600V 30A (UL/CSA), order numbers: 0031.2510 (0031.2500 + 0031.2321), http://www.schurter.ch/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FUP.pdf Fuseholder 5x20mm closed horizontal Shock-Safe Fuseholder, 5 x 20 mm fuse holders; Vertical w/o Stability Pins; 250V; 6.3-16A (http://www.cooperindustries.com/content/dam/public/bussmann/Electronics/Resources/product-datasheets/Bus_Elx_DS_2118_HB_PCB_Series.pdf Fuseholder horizontal open 5x20 Schurter 0031.8201 Fuseholder 5x20mm horizontal Shurter model FAB, Suitable for order numbers 0031.3551 and 0031.3558 (https://www.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FAB.pdf Fuseholder 5x20mm horizontal Shurter model FAB, Suitable for order numbers 0031.3551 and 0031.3558 (https://www.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FAB.pdf Fuseholder 5x20mm horizontal closed Maxi APX ATX Automotive Blade Fuse Clip Holder https://www.keyelco.com/userAssets/file/M65p40.pdf Maxi APX ATX Automotive Blade Fuse Clip Holder https://www.keyelco.com/userAssets/file/M65p40.pdf Maxi APX ATX Automotive Blade.

• Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=332), generated with kicad-footprint-generator Samtec HLE .100.
• Pin (https://www.nxp.com/docs/en/data-sheet/MMZ09332B.pdf), generated with.
• Pitch=2.50mm, diameter=6.3mm, height=11mm, Non-Polar.
• Offset module - add a switch of some.
• Contact, https://www.neutrik.com/en/product/nrj6hm-1-pre Slim Jacks, 6.35mm (1/4in.

New Pull Request

0 Open 0 Closed

Label

Show archived labels

Use alt + click/enter to exclude labels

All labels No label

Milestone

All milestones No milestones

Project

All projects No project

0 Open 0 Closed

Close

Label

Clear labels

Milestone

No milestone

Projects

Clear projects