Labels Milestones
BackClock signal, start/stop, manual step (sw13) // 1 for cv glide atten (rv15 // glide in (sleeve and normal both GND) 6x Sockets, 2pin: Gate out (could normal to TP10, optional) - Casc out 2x Toggle Switches, 3pin: - CV Range - Once/Cont When in Cont mode shorts Casc Out normal to Reset In - diode to U2-3 Clock In - U1-13 (can get at from top when assembled Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Single Step - 12V through 10k Ohms to U-1-14, more like 1M ohms when off - Single Step - 12V through 10k Ohms to U-1-14, more like 1M ohms when off Single Step - 12V through 10k Ohms to U-1-14, more like 1M when off - Glide In - ~27K to U3-8? No, transistors maybe activate? - Clock Rate - variable resist +6k between U2-8 and U2-9 - Reset Sw - when pressed, short +12V and Reset In socket - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well - Once/Cont When in Cont mode shorts Casc Out normal to Reset In Pause CV In Latest commits for file Schematics/SynthMages.pretty/3.5mm_jack_hole_nonpcb.kicad_mod d62e7c6861 More work finding space for everything, lining things up more Make slider and LED footprints match current OpenSCAD model .gitignore | 16 Docs/precadsr_bom.md | 4 Hardware/PCB/precadsr/precadsr.sch | 472 aoKicad | 1 | Conn_01x07 | \*(optional) SIP socket, 2.54 mm, 1x2 (see [build notes](build.md | | | | Tayda | A-1605 | | | | R9, R11, R13 | 3 | 100R | Resistor | | | | | Tayda | A-2939 | | | | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35"/>