Labels Milestones
Back43045-1000 (alternative finishes: 43045-062x), 3 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole M2, height 4.5, Wuerth electronics 9774080951 (https://katalog.we-online.de/em/datasheet/9774080951.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a label // internal clock signal (possibly external). Commonly called a "Baby 8". Final tweaks, version submitted to JLCPCB on 20240124 Experimenting with more representative footprint. Improve capacitor footprints, especially the pitch of the holder // e.g.: Radio Shaek is 51mm x 70mm and 1.2mm thick module pcb_holder(h, l, th, wall_thickness=thickness) { v_wall(h, l, wall_thickness); Align panel to PSU PCB (will affect choice of 9 mm pots, you're on your own! * The SPDT toggle switches Notes about component heights, swapping rotary and toggle switches Port in fixes from v1.0 (the one that went to the schematic is incorrect Ins: Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 - Clock rate goes down when resistance goes up, opposite.
New Pull Request