Labels Milestones
BackPlane on only one cross-board wire is needed, vs 3 if the PCB is used. C1 is too small; need more than fifty percent (50%) or more of the plastic walls. Clf_wall = 2; center_adjust = 2.5; rail_clearance = 8.5; // mm from very top/bottom edge and where it is machine-specific data v1.0 Final revision; added custom DRC as project file ) ) Final revision; added custom DRC as project file tstamp 30cbcf99-eb70-4e15-8409-33e0ecd46602) Final revision; added custom DRC as project file attr exclude_from_pos_files exclude_from_bom) Final revision; added custom DRC as project file Fireball/Fireball.kicad_dru main synth_tools/Schematics/SynthMages.pretty/SLIDE_POT_0547.kicad_mod 84 lines tstamp 189e5c14-d81a-45a9-b8ba-c69582490088) Final revision; added custom DRC as project file tstamp 52a45927-621d-4774-9080-e26ba88e3d95) Final revision; added custom DRC as project file (pts Final revision; added custom DRC as project file tstamp eb945be1-4d1d-46b5-b945-d4ebde74dae2) Final revision; added custom DRC as project file tstamp 60305f7c-b08f-48d5-a3e4-4d4a9046f92f) Final revision; added custom DRC as project file tstamp 52a45927-621d-4774-9080-e26ba88e3d95) Final revision; added custom DRC as project file.
- Vertex 2.58025 1.95159 18.574 vertex -2.37646 2.37646.
- -2.879478e-01 1.286303e-05 facet normal 0.241804.
- 10 top-side contacts, 1.0mm pitch, 1.0mm height.
- 1.005020e+02 2.655000e+01 facet normal 3.519677e-001 6.132856e-001 7.071065e-001 vertex.