Labels Milestones
BackVertical Bulkhead Molex SMA RF Connector, Edge Mount, (http://www.molex.com/pdm_docs/sd/732511150_sd.pdf Molex SMA RF Connectors, Edge Mount, (http://www.molex.com/pdm_docs/sd/732512120_sd.pdf Connector SMA, 0Hz to 20GHz, 50Ohm, Edge Mount (http://suddendocs.samtec.com/prints/sma-j-p-x-st-em1-mkt.pdf SMA Straight Samtec Edge Mount Universal Serial Bus (USB) Shielded I/O Plug, Type C, Right Angle, Surface Mount, ZIF, Bottom Contact FFC/FPC, 200528-0200, 20 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator JST EH series connector, SM07B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.75 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360271, block size 5x5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-7-2.54, 7 pins, pitch 5.08mm, size 30.5x8mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-407, 45Degree (cable under 45degree), 8 pins, pitch 2.54mm, size 30.9x6.2mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type094_RT03505HBLU, 5 pins, pitch 7.5mm, size 39.8x14mm^2, drill diamater 1.4mm, pad diameter 2.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc0015.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 22-27-2151, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_dfn_qfn_generator.py LFCSP, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8235-8-bit-avr-microcontroller-attiny20_datasheet.pdf#page=212), generated with kicad-footprint-generator Harwin Female Vertical Surface Mount Slide Switch, right-angle, https://www.ckswitches.com/media/1424/pcm.pdf 0 Littlefuse 14.73x2.54mm, 175VDC 5W, SPDT Reed Switch CT10-XXXX-G1 Coto Technologies SPST Reed Switch CT05-XXXX-G1 Coto Reed SPST Switch Coto Technologies SPST Reed Switch CT10-XXXX-G4 ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, With stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAFE010.html ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, Without stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAEE010.html TL3305 Series Tact Switch Low-profile SMD Tactile Switch, https://www.e-switch.com/system/asset/product_line/data_sheet/165/TL3342.pdf SWITCH SMD KSA SW 4-bit rotary coded switch, J-hook, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf 4-bit rotary coded switch, gull wing, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf 4-bit rotary coded switch, through-hole, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf SPST Off-On Pushbutton, 1A, 30V, CW Industries P/N GPTS203211B, http://switches-connectors-custom.cwind.com/Asset/GPTS203211BR2.pdf SPST button tactile switch D MEC 5G single pole.
- Dompurify@3.1.0 - (MPL-2.0 OR.
- 3D Printing/Pot_Knobs/pot_knob_two_parts_cap.stl Normal file Unescape 3D.