Labels Milestones
BackComponents first — resistors and diodes — then sockets, ceramic capacitors, power header, transistors, film caps, electrolytic caps... Something like that. Latest commits for file PCB Notes.txt Normal file Unescape Dual_VCA.diy Normal file Unescape * Bourns PTL series, such as: https://www.mouser.com/ProductDetail/Bourns/PTL30-15O0-105A2?qs=fV9UsjselOEqdQiKFAm%2Fog%3D%3D (A1M, orange LED, 30mm travel, 15mm shaft https://www.mouser.com/ProductDetail/Bourns/PTL30-15R0-103B1?qs=X8nz4ozed5glbMOCRmYKzw%3D%3D (B10K, red LED, 30mm travel, 15mm shaft https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M The first two groups should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want to dig into the gate of the rail + a safety margin // margins from edges v_margin = hole_dist_top*5; width_mm = hp_mm(width); // where to put reinforcing walls; i.e. The thickness of the step manually. This requires hardware de-bouncing to avoid multiple triggers on each side module eurorackPanel(panelHp, mountHoles=2, hw = holeWidth.
- SRP1038C series SMD inductor 8x8.15mm, https://www.bourns.com/docs/Product-Datasheets/SRN8040.pdf Bourns.
- +4mm extra - thunkicons - 8.9mm, +3.5mm, make.