Labels Milestones
BackOne per step, to set output voltages. (10) One potentiometer per step, to enable/disable gate per step. (10 - CLOCK in - RESET / CASCADE in - glide in (sleeve and normal both GND 6x Sockets, 2pin: - Glide attenuator (B10k) (join two left pins from below) Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) - Clock Out - 1K to TP5 - Gate out (could normal to TP10, optional) - Casc out 2x Toggle Switches, 2pin: all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) - Clock in socket with amplifier to handle weaker (<6v) signals Clock out socket, with option to send CV; could also go to same bus 2x Pushbutton switches, all 2pin: - all step switches (all go to same bus 2x Pushbutton switches, all 2pin: - reset in - CV Range - Once/Cont When in Cont mode shorts Casc Out normal to Reset In socket - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor limiting max drone frequency:
re-re-remove the mysterious extra trace re-re-remove the mysterious extra trace main Add scad for v3.2 3afa35e4b1 PCB initial layout, no traces }, Add ground fills, fix some.
- Normal -1.011997e-14 5.429241e-15 -1.000000e+00 d8eca8dc7e Go to file.
- Magjack 1 Port RJ45 Connector Through.
- 5/3-H-7.5-ZB 1719202 Connector Phoenix Contact, SPT 1.5/4-H-3.5.