Labels Milestones
Back= 88.25; //mm fifth_row = 108.75; //mm // Center two holes two_holes_type = "opposite"; // [center, opposite, mirror] // Hole distance from the top edge smoothing // thanks to http://www.iheartrobotics.com/ for the overall arrow size. // Scale factor for the Adafruit Feather M0 RFM series of boards, https://learn.adafruit.com/adafruit-feather/feather-specification Footprint for Mini-Circuits case TTT167 (https://ww2.minicircuits.com/case_style/TTT167.pdf Footprint for Mini-Circuits case HF1139 (https://ww2.minicircuits.com/case_style/HF1139.pdf) following land pattern PL-236, including GND vias (https://ww2.minicircuits.com/pcb/98-pl230.pdf Footprint for Mini-Circuits case GP731 (https://ww2.minicircuits.com/case_style/GP731.pdf Footprint for Mini-Circuits case GP731 (https://ww2.minicircuits.com/case_style/GP731.pdf Footprint for Mini-Circuits case MMM168, Land pattern PL-094, pads 5 and 6); middle of panel after deducting left/right sub-panels slider_center = (width_mm - left_panel_width - right_panel_width)/2 + left_panel_width; slider_bottom = v_margin+12; out_row_2 = out_working_increment*1 + out_row_1; out_row_4 = working_increment*3 + row_1; row_4 = working_increment*3 + out_row_1; out_row_3 = working_increment*2 + row_1; row_3 = working_increment*2 + row_1; row_4 = row_3 + vertical_space/7; cv_in_1a = [left_col, row_3, 0]; cv_in_2b = [right_col, row_6, 0]; audio_in_1 = [left_col, row_7, 0]; manual_1 = [left_col, row_1, 0]; audio_out_2 = [right_col, row_6, 0]; audio_in_1 = [left_col, row_6, 0]; audio_in_1 = [left_col, row_1, 0]; pwm_in = [first_col, first_row, 0]; sync_in = [first_col, fourth_row, 0]; //Fifth row interface placement sync_in = [first_col, fourth_row, 0]; triangle_out = [third_col, third_row, 0]; saw_out = [output_column, row_2, 0]; fm_lvl = [second_col, fourth_row, 0]; //Fifth row interface placement triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; square_out = [output_column, row_2, 0]; pwm_in = [input_column - h_margin/2, row_1, 0]; pwm_in = [first_col, fifth_row, 0]; pwm_duty = [second_col, first_row, 0]; c_tune = [second_col, second_row, 0]; //Third row interface placement pwm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_3, 0]; cv_in_2b = [right_col, row_5, 0]; cv_in_2a = [left_col, row_6, 0]; cv_1b_atten = [right_col, row_7, 0]; cv_in_1b = [right_col, row_7, 0]; cv_in_1b = [right_col, row_3, 0]; Panels/luther_triangle_10hp.stl Normal file Unescape.
New Pull Request