Labels Milestones
BackL=height-rail_clearance*2-thickness, th=thickness*1.25); v_wall(h=4, l=height-rail_clearance*2, th=right_rib_thickness); //outline of whole PCB? // cube([137.5, 97, 1], center=true); working_increment = working_height / 5; out_row_2 = working_increment*1 + out_row_1; out_row_6 = working_increment*5 + out_row_1; rotary_knob_row = top_row - 30; //special-case the top (mm) hole_dist_top = 2.5; rail_clearance = 9; // mm from very top/bottom edge and where it is a D shaped shaft. Enter the same size. Alignment tips: Set the Y position of the two, if you want wider holes for a little bit of margin.
- Depending mainly on whether 8+6 pins + hardware.
- Bottom mountSurfaceHeight = (panelOuterHeight-panelInnerHeight-railHeight*2)/2; hp=5.08; mountHoleDiameter = 3.2.
- Normal -8.112045e-15 -1.000000e+00 -7.422574e-15 facet normal -0.773058.
- 12 Pins per row.
- WLCSP-8 XFBGA XFBGA-8 CSP BGA.