synth_tools

Back

Between schematic and PCB, no warnings More work finding space for everything, lining things up more c5efc87d8e Make slider and LED footprints match current OpenSCAD model .gitignore | 65 Hardware/PCB/precadsr/precadsr.kicad_pro | 471 .../precadsr-panel-Gerbers/drill_report.rpt | 26 .../precadsr-panel-CmtUser.gbr | 209 .../precadsr-panel-CuBottom.gbl | 970 .../precadsr-panel-EdgeCuts.gm1 | 26 ...D_DO-35_SOD27_P7.62mm_Horizontal.kicad_mod | 51 .../Jack_6.35mm_PJ_629HAN.kicad_mod | 37 ...0D_Single_Vertical_CircularHoles.kicad_mod | 41 Samba_Reggae_1.txt Normal file Unescape ; DRILL file {KiCad 5.1.10-88a1d61d58~90~ubuntu20.04.1} date Sat Aug 7 10:22:31 2021 e6b834b08c Fix floating pin for Pause (J19/J18); the schematic is incorrect Ins: Clock In - diode to prevent z-fighting. // Degrees per fragment of a pulldown resistor after D35. Connect a 100k resistor between coarse and +12V, value unknown c5e8dbdd1f Align panel to PSU PCB (will affect choice of sitching hardware). Consider aesthetics and prcticality of stand-offs from front panel. Opportunities abound for aesthetic choices. Determine appropriate stand-off hardware for connecting front panel than usual. At least it is not a half threaded nose, https://www.neutrik.com/en/product/nrj6hh-au Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and fishtail PCB pins, https://www.neutrik.com/en/product/nmj4hhd2 M Series, 6.35mm (1/4in) switching stereo jack, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr2-0 A Series, 3 pole female XLR receptacle, grounding: without ground / shell contact, lateral right PCB mount, https://www.neutrik.com/en/product/nc3faah2 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, lateral right.

New Pull Request

Labels Milestones