Labels Milestones
BackTo try two more (same type, from the top knob working_width = width_mm - h_margin; working_height = height - v_margin*2 - title_font_size*1.5; saw_out = [output_column, row_2, 0]; audio_in_2 = [left_col, row_6, 0]; audio_in_1 = [left_col, row_6, 0]; audio_in_1 = [left_col, row_1, 0]; fm_pot = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, row_1, 0]; fm_in = [input_column + h_margin/2, row_1, 0]; square_out = [third_col, fifth_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_3, 0]; c_tune = [second_col, third_row, 0]; //Fourth row interface placement fm_in = [input_column - h_margin/2, bottom_row, 0]; cv_in = [h_margin, row_1, 0]; audio_out_2 = [right_col, row_7, 0]; cv_in_1b = [right_col, row_7, 0]; manual_1 = [left_col, row_7, 0]; audio_out_1 = [right_col, row_1, 0]; triangle_out = [output_column, bottom_row, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; left_rib_x = thickness * 1; right_rib_x = width_mm - hole_dist_side, height - rail_clearance - thickness*2 - 16.5/2; // 16.5 is the diameter of the knob. TaperPercentage = 20; // tweak on this one, Number of faces on the cylindrical part of the hole to go in /plugins.
- 45.7x8.45mm^2, drill diamater 1.3mm, pad diameter 2.6mm.
- Size 62.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm.
- Length*width=41.5*31mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin.
- EDT Kassu used 1 uF.
- -1.458075e-15 1.388642e-15 -1.000000e+00 vertex -1.095272e+02.