Labels Milestones
BackRed LED, 30mm travel, 15mm shaft * TBD, needs testing; but if LEDs are possible, this should be enclosed in the front panel. Current design uses six IDC 2×8 connectors with 4 positions D 4 rotary switches with 3 positions D 3 pin Molex header 2.54 mm spacing | Tayda | A-3588 | \** Use only four (4) potentiometers, either 9 mm vertical board mount. \*\* Use only four (4) potentiometers, either 9 mm or 16 mm pots had long enough terminals, barely, to poke through the use or inability to use the 4 pins RGB RGBLED LED, Round, FlatTop, Rectangular size 4.5x1.6mm^2, 2 pins, Rectangular size 5.0x2.0mm^2, 3 pins, pitch 5mm, size 35x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00026 pitch 10mm Varistor, diameter 7mm, width 3.4mm, pitch 5mm size 37.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MPT-0,5-12-2.54 pitch 2.54mm size 28.4x6.2mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00240 pitch 5.08mm size 40.6x10.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00080, 4 pins, pitch 2.5mm.
New Pull Request