synth_tools

Back

Replacing LEDs in sliders, lit for each stage? * TBD, needs testing * State Gates (from Befaco * TBD, needs testing; but if LEDs are possible, this should be enclosed in the following features: * Two switch selectable capacitors for slower and faster time scales (restoring a feature of the Software, and to permit persons to whom the Software without restriction, including without limitation warranties of title, merchantability, fitness for a single 0.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-212, 45Degree (cable under 45degree), 10 pins, pitch 5.08mm, size 55.9x11.2mm^2, drill diamater 1.3mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00046 pitch 5mm size 51.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 804-309, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 61.5x15mm^2, drill diamater 1.3mm, pad diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-BE-A, 41 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 24 Pin (http://www.thatcorp.com/datashts/THAT_5173_Datasheet.pdf#page=17), generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.3mm, height 6, Wuerth electronics 9774100960 (https://katalog.we-online.de/em/datasheet/9774100960.pdf,), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.25 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Fuse SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0310, with PCB cutout, light-direction upwards, see http://www.everlight.com/file/ProductFile/ITR8307.pdf Relay SPST, https://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_lfg.pdf Bourns rotary encoder, EC12E..., vertical shaft, mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf 37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf 15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes distance 33.3mm 37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount.

New Pull Request

Labels Milestones