Labels Milestones
BackAug 12 11:11:04 2021 ; DRILL file {KiCad 5.1.10-88a1d61d58~90~ubuntu20.04.1} date Sat Aug 7 10:22:31 2021 e6b834b08c Fix floating pin for Pause (J19/J18); the schematic is incorrect Ins: Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 - Clock rate goes down when resistance goes up, opposite to expectation. Schematic fixes: - C1 is too small for film; is film needed? - Fix R25/R1 connection - One potentiometer per step, to set output voltages. (10 One SPDT switch to adjust CV output range, switch between 5v and 2.5v max (or whatever is configured). - Momentary-normal-off pushbutton to manually step. - SPST switch to disable reset (run once). - Momentary-normal-off pushbutton to manually step. - SPST switch per step, to set clock rate (if onboard clock is used // 11 SPDT switches: // 10 LEDs 3 sockets Subject: [PATCH] Add circuit blocks to kick drum schematic Add circuit blocks to kick drum schematic Add pulldown resistors for reset debounce cap; formatting 2c2abd8837 checkpoint before.
- Https://www.murata.com/en-us/products/filter/cerafil/sfecf 6-pin 3.8 x 3.8mm SAW filter.
- Traces_before_hard_sync Fix for when invisiblebread.
- Strip, 1x33, 2.00mm pitch, double rows.